BlastIR Pro Multizone

SKU SW-30458-MZ

Multizone: Protect from Interference

Most IR extenders are programmed to pass any signal that is sent through the receiver. Sometimes this may disrupt your setup as a few devices in your closet run on a similar IR frequency and cause interference with one another. The Multizone feature protects your devices from interference from other devices. This gives you the ability to have certain devices controlled only from specific areas in your setup.

Ir Guide

"Multi-zone support" has been a requested feature from many of our customers that have extended IR signals but unintentionally were controlling two similar devices located in the same space. Cable boxes have especially been a pain since multiple cable boxes are easier to have based in the same area. The BlastIR Multizone ensures you only control the box that is attached to one of your TVs and not the other.

Extend and Route Remote Control Signals

The BlastIR is designed to get your remote control's signal to where it needs to go. Since remote control signals (IR) need "line-of-sight" to work, you will need this extender if the equipment you're trying to control is not in sight.

RC-MM Support: The Pro Difference

The BlastIR Pro Multizone offers several new features including smaller form factor, aesthetic designs, and increased compatibility.

RC-MM is a new IR protocol that was developed to be used with wireless keyboards and mice. The protocol uses much shorter waves than a typical IR signal and uses less power. Due to the shorter wave lengths and lower power most IR sensors are unable to process the signal. The BlastIR Pro uses high fidelity wideband IR sensors to process this protocol.

PLEASE NOTE: This product has been known to have compatibility issues with certain U-verse, Motorola VIP, and Cisco Explorer cable boxes. Please contact us if you have any questions about your setup.


IR Connecting Block

  • Provides one IR receiver input and six IR emitter outputs
  • Works with all brands of Audio/Video IR remote controls
  • 12VDC status input jack and LED indicator
  • Interface: 3.5mm mini plug (for receiver and emitters);
  • Separate terminal block adapter
  • Dimensions: 70 W x 25 H x 45 D mm
  • RC-MM Support

    Dual Band IR Receiver

    • Designed to be surface mounted in multiple applications.
    • Works with all brands of Audio/Video IR remote controls
    • IR receiving: 18' ~ 30' (remote control dependent)
    • Receiving frequencies: 34 - 60 kHz
    • Dimension: 20mm x 15mm x 13mm (receiver only)
    • Includes adhesive tape for IR mounting
    • 5 foot cable

    Dual IR Emitters

    • Designed to be surface mounted in multiple applications.
    • Works with all brands of Audio/Video IR remote controls
    • Operating Frequency: 38 - 56KHz
    • Interface: 3.5mm mini plug
    • Cable length: 9 feet
    • Includes adhesive tape for IR mounting

    Package Contents

    • 1- In-Wall IR Connecting Block
    • 3 - Dual IR Emitters
    • 3 - Dual Band Surface Mini IR Receiver
    • 1 - Power Supply



    If you're having trouble setting up your BlastIR PRO, it is very easy to troubleshoot. This video will show you how easy it is to set up and troubleshot your BlastIR. Even though we use a BlastIR classic, the same techniques apply.

    Customer Reviews

    Based on 2 reviews
    Part Number: SW-30458-MZ
    BlastIR Pro Multizone

    Pros: Good Multi room IR emitter Cons: NoneOther: they need to make the 10x 3.5mm 1/8" Stereo Audio Male Plug to AV 3-Screw Terminal Connector thinner to fit right on the receiver

    Part Number: SW-30458-MZ

    Pros: I was looking for something like this for a while and cane across the MultiRoom transmitter.Cons: None.Other: Excellent product no complaints defense will recommend to a friend ??????????

    You recently viewed

    Clear recently viewed

    Net Orders Checkout

    Item Price Qty Total
    Subtotal $0.00

    Shipping Address

    Shipping Methods