BlastIR Pro

$39.95
SKU SW-30458

Control all of your home theater video sources, and anything else that uses a standard IR remote control from behind walls and other obstructions.

Extend and Route Remote Control Signals

The BlastIR is designed to get your remote control's signal to where it needs to go. Since remote control signals (IR) need "line-of-sight" to work, you will need this extender if the equipment you're trying to control is not in sight.


diagram

How This Works

This kit includes an IR receiver, a connecting block (which also serves as a signal repeater), and IR emitters. The IR receiver is a small sensor that you can mount on your TV's bezel or anywhere else in the room where you will want to point your remote. It is small and very easy to hide, but must be in line-of-sight to wherever you will be using your remote control from. This receiver sends the signal over 3.5mm mini stereo wire to the connecting block.

The connecting block then repeats and sends the same signal through all IR emitters connected to the block. Each emitter sends out the same IR signal to your devices, and you can tape them directly to your equipment or simply fix them to a nearby shelf or wall pointing at your devices.


RC-MM Support - The Pro Difference

Like other products in the BlastIR family this unit supports dual band IR signals but it doesn’t stop there, the Pro supports RC-MM Protocol.

RC-MM is a new IR protocol that was developed to be used with wireless keyboards and mice. The protocol uses much shorter waves than a typical IR signal and uses less power. Due to the shorter wave lengths and lower power most IR sensors are unable to process the signal. The BlastIR Pro uses high fidelity wideband IR sensors to process this protocol.

PLEASE NOTE: This product has been known to have compatibility issues with certain U-verse, Motorola VIP, and Cisco Explorer cable boxes. Please contact us if you have any questions about your setup.

Specifications

Connecting Block

  • Three 3.5mm Receiver Inputs
  • Six 3.5mm Emitter Outputs
  • 5V 500mA Power Input
  • LED Signal Indicator
  • RC-MM Support

Dual Band IR Receiver

  • Designed to be surface mounted in multiple applications.
  • Works with all brands of Audio/Video IR remote controls
  • IR receiving: 18' - 30' (remote control dependent)
  • Receiving frequencies: 34 - 60 kHz
  • Dimension: 20mm x 15mm x 13mm (receiver only)
  • Includes adhesive tape for IR mounting
  • 5 foot cable

Dual IR Emitters

  • Designed to be surface mounted in multiple applications.
  • Works with all brands of Audio/Video IR remote controls
  • Operating Frequency: 38 - 56KHz
  • Interface: 3.5mm mini plug
  • Cable length: 9 feet
  • Includes adhesive tape for IR mounting

Package Contents

  • 1- IR Connecting Block
  • 4 - Dual IR Emitters
  • 1 - Dual Band Surface Mini IR Receiver
  • 1 - Power Supply

Videos

Troubleshooting

If you're having trouble setting up your BlastIR Pro, it is very easy to troubleshoot. This video will show you how easy it is to set up and troubleshot your BlastIR. Even though we use a BlastIR classic, the same techniques apply.

Customer Reviews

Based on 46 reviews
85%
(39)
4%
(2)
4%
(2)
4%
(2)
2%
(1)
R
R.
Part Number: SW-30458
For Denon AVR-X1400H Receiver

Pros: Worked for my Denon AVR-X1400H Receiver using the "IR Input" on it's rear panel. The receiver was located inside a cabinet thus needed an IR extender.Cons: Have to be within ~15' of IR detector for the remote's signal to be detected.Other: Wanted to use the IR Input on rear panel of the Denon receiver instead of mounting an emitter on the front panel. Used a 3.5mm Stereo Audio, Male to Male Patch Cable from the BlastIR repeater to the Denon IR Input. IT WORKED!

A
A.
Part Number: SW-30458
Does what it´s supposed to do

Pros: Small receiver. Multiple transmitters that attach easily. Most important: long enough cables.Cons: NoneOther: Works perfectly with all my devices even my old VCR.

A
A.
Part Number: SW-30458
Awesome!

Pros: Works just as advertised.Cons: NoneOther:

A
A.
Part Number: SW-30458
BlastIR by Sewell

Pros: worked perfectly in my RV, for hidden BluRay Player, it can now stay hiddenCons: noneOther:

P
P.
Part Number: SW-30458
Wonderful Product

Pros: This device is as advertised. It was very easy to setup and easy to use. Once I tested the IR Emitter and Receiver to make sure I had everything connected properly, I adhered the IR Emitters to devices and away I went. It has been working ever since.Cons: Other: You need to get one if you want to make your devices clean and out of sight!

You recently viewed

Clear recently viewed

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods